PADI Technical Dive – TEC 40
Consists of three knowledge development sections, three practical application sessions and four training dives. Designed for the diver transitioning from recreational diving to technical diving.
The PADI Tec 40 course is where you transition from recreational scuba diving to technical diving. It’s a great place to start because it’s the first subdivision of the full PADI Tec Diver course and bridges the gap between no stop diving and full technical deep decompression diving. You gain experience and begin building the knowledge and skills you need to continue your tec diver training. You will qualify to make limited decompression dives to 40 metres/130 feet.
To enroll in the Tec 40 course, you must be:
- A PADI Advanced Open Water Diver
- A PADI Enriched Air Diver with at least 10 dives using enriched air deeper than 18 metres/60 feet
- A PADI Deep Diver or proof of at least 10 dives to 30 metres/100 feet
- At least 18 years old and have a minimum of 30 logged dives
You also need to have a Medical Statement signed by a physician within the last 12 months.
Note that qualifying certifications from other diver training organizations may apply – ask your PADI Tec Deep Instructor.
WHAT YOU WILL LEARN IN PADI TEC 40
The Tec 40 course consists of three knowledge development sections, three practical application sessions and four training dives. You’ll learn about:
- Technical diving’s risks and responsibilities
- Technical diving equipment, proper rigging and set up
- Gas planning, oxygen limits and decompression planning
- Team diving techniques and emergency procedures, such as dealing with free flows, manifold leaks and out of gas situations
You’ll start with your basic scuba diving equipment and add technical equipment, which essentially means you’ll begin to double up on gear. You may dive with backmounted or sidemounted cylinders. Our Sirolodive’s Professional team of PADI Tec Instructor will have you dive with EANx for additional conservatism.