PADI Technical Dive – TEC 45
Part 2 of the PADI Tec Deep Diver program. Extend your depth limit to 45 metres/145 ft. Learn to plan & execute repetitive decompression dives using a single stage/decompression cylinder.
The PADI Tec 45 course is the second part of the full PADI Tec Deep Diver program. You’ll extend your depth limit to 45 metres/145 feet and learn to plan and execute repetitive decompression dives using a single stage/decompression cylinder. It puts you in a complete tec diving rig, which can be either backmount or sidemount. You’ll also make accelerated decompression dives using EANx or pure oxygen. This is a course where you’ll rise to the challenge and make the commitment to become a technical diver.
To enroll in the Tec 45 course, you must:
- Be a PADI Tec 40 diver
- Be a PADI Rescue Diver
- Have a minimum of 50 logged dives, with at least 12 dives on enriched air nitrox deeper than 18 metres/60 feet and 6 dives deeper than 30 metres/100 feet
- Be at least 18 years old
- Have a Medical Statement signed by a physician within the last 12 months
WHAT YOU WILL LEARN IN PADI TEC 45
Your Tec 45 training consists of three knowledge development sections, three practical application sessions and four open water dives. Building on what you learned in the Tec 40 course, you focus on the function and maintenance of tec diving equipment and associated issues. You continue fine-tuning gas planning and calculating accelerated decompression stops. Plus, you learn to think like a technical diver.
You’ll use full technical equipment, which includes wings and doubles plus an additional deco cylinder, or you may use a technical sidemount configuration. Your PADI Tec Deep Instructor will explain the gear required for your tec diving adventures.